ATM/F/Ex

• Pressure range 0.6 … 7.8 bar, absolute
• Process connection Flange Ø 18.4/9.5 mm (2.01.0271)
• Electrical connection PUR cable, connector Samtec IPD1-05-D-K
• Output signal 4 … 20 mA
• Power supply 10 … 30 V DC
• Maximum process temperature 100°C
• Accuracy <=+/- 0.1% FS
• EEPROM integrated in the sensor

TM passive transmitter

• Pressure range 850 … 1150 mbar, absolute
• Process connection G 1/4 A, with nozzle
• Electrical connection PUR wires 500mm, 4 x 0.2 mm2
• Maximum process temperature 150°C
• Special feature: Calibrated horizontally

Application

Helium pycnometer is a measuring device for determining the density of solids or liquids by weighing.

Transducer with Flange

• Pressure range 0 … 2.5 bar, absolute
• Overpressure 7.5 bar
• Version Flange welded Ø 24/19×36 mm (2.01.0403)
• Accuracy <± 0.25 % FS
• Temperature range +10 … +40°C
• Thermal shift zero point ± 0.15 % FS
• Thermal shift span ± 0.3 %

Type ATM.1ST

• With improved dead volume
• Pressure range 0 … 0.8 bar gauge
• Process connection G1/2 male, flush, no HEX, Ø 24 mm
• Electrical connection Lumberg RSF 4, 4-pole
• Accuracy <=+/- 0.05% FS
• Temperature compensation: 0 … 70°C

ATM.1ST

• Pressure range 0 … 100 bar, sealed gauge
• Overpressure 3xFS
• Membrane 100 micro
• Process connection M22 x 1.5 M, flush diaphragm
• Electrical connection connector DIN 43650, metal thread
• Accuracy <=+/- 0.1% FS
• Seal Viton

ATM/N

• Pressure range 0.5 … 2.5 bar, absolute
• Process connection G 1/4 male
• Electrical connection PUR Kabel
• Compensated temperature range: -5 … 50°C
• Seal Viton