Application example: depth measurement on CTD Probes

More about the application ➔ competence platform

Main features

• Salt water resistance
• High accuracy: temperature compensation and long term stability
• Low power consumption
• salt water resistance

Specifications

• Pressure measurement range: 0-2b/0-5b/0-10b/0-50b/0-100bar absolute

• Overload: 3x FS

• Burst pressure: >850 bar

• Accuracy: ≤±0.05 % FS.

• Total error (-5ºC … 35ºC): ≤ ±0.1 % FS

• Long-term stability: ≤ ±0.1 % FS/year.

• Supply voltage: 5 V ± 0.25V

• Output signal:   0.5 – 4.5 V

• Power consumption: < 11 mWatt

• Material: Hastelloy

Application

Filling machine for injection bags

Specifications

• ATM/F analog pressure/temperature transmitter with clamp flange 1 inch,

• Connector Binder 723, 5 pins demountable

• Accuracy +/- 0.1% FS

• Oil filling: certified for food applications

Similar standard products

➔ ATM/F

Application

The sensor system is used to monitor static or dynamic pressure (explosion) on tank systems. A wide variety of media are measured, mostly organic or inorganic dusts, dyes, salts, solvents, alkalis and acids (cleaning) etc. The sensor is always mounted above the maximum level of the tank.

ATM.1ST

• Pressure range 0 … 0.8 MPa, absolute
• Process connection G 1/4 M, with 2 boreholes Ø 1.2 mm in hex
• Electrical connection Connector MIL 38999, 10SL, 5/8″-23 A
• Maximum process temperature 125°C
• Accuracy <=+/- 0.1% FS
• Compensated temperature range: -40 … 125°C
• Version welded
• Electronic packed in gel
• Seal copper 9

ATM/T Pressure and temperature sensor

• Pressure range 0 … 20 bar, absolute
• Overpressure 3xFS
• Process connection G 1/2 M, flush diaphragm, gilded
• Electrical connection Stecker Lumberg RSF 4, 4 polig
• Temperature measuring range -40 … 125°C
  

Similar blog

➔ Lifetime Optimization of Pressure Transmitters

Application

Gold platted transducer for hydrogen application
Only with pressure connection G 1/2″ male flush
Pressure ranges not below 1 bar and not over 600 bar
The gold coating is about 0.1 … 1 μm

ATM/F/Ex

• Pressure range 0.6 … 7.8 bar, absolute
• Process connection Flange Ø 18.4/9.5 mm (2.01.0271)
• Electrical connection PUR cable, connector Samtec IPD1-05-D-K
• Output signal 4 … 20 mA
• Power supply 10 … 30 V DC
• Maximum process temperature 100°C
• Accuracy <=+/- 0.1% FS
• EEPROM integrated in the sensor

TM passive transmitter

• Pressure range 850 … 1150 mbar, absolute
• Process connection G 1/4 A, with nozzle
• Electrical connection PUR wires 500mm, 4 x 0.2 mm2
• Maximum process temperature 150°C
• Special feature: Calibrated horizontally

Application

Helium pycnometer is a measuring device for determining the density of solids or liquids by weighing.

Transducer with Flange

• Pressure range 0 … 2.5 bar, absolute
• Overpressure 7.5 bar
• Version Flange welded Ø 24/19×36 mm (2.01.0403)
• Accuracy <± 0.25 % FS
• Temperature range +10 … +40°C
• Thermal shift zero point ± 0.15 % FS
• Thermal shift span ± 0.3 %

Type ATM.1ST

• With improved dead volume
• Pressure range 0 … 0.8 bar gauge
• Process connection G1/2 male, flush, no HEX, Ø 24 mm
• Electrical connection Lumberg RSF 4, 4-pole
• Accuracy <=+/- 0.05% FS
• Temperature compensation: 0 … 70°C

ATM.1ST

• Pressure range 0 … 100 bar, sealed gauge
• Overpressure 3xFS
• Membrane 100 micro
• Process connection M22 x 1.5 M, flush diaphragm
• Electrical connection connector DIN 43650, metal thread
• Accuracy <=+/- 0.1% FS
• Seal Viton

ATM/N

• Pressure range 0.5 … 2.5 bar, absolute
• Process connection G 1/4 male
• Electrical connection PUR Kabel
• Compensated temperature range: -5 … 50°C
• Seal Viton

Subsea application

The water ingress detector is used to measure a possible leak of saltwater ingress into the Subsea Control Unit

Water ingress detector

• Alarm levels 3 different alarm levels
• Accuracy ± 0.3 mA
• Electrical connection 6 pin glass-to-metal seal
• Temperature range -20 to 85°C

ATM Subsea with special Seacon, type MSSK connector

• Pressure ranges 0 to 1‘000 bar
• Process connection 7/16-20 UNF female
• Electrical connection Seacon, Typ MSSK-8#16-FCR-HP
• Temperature range -10 to 50°C compensated

ATM Subsea with special Seacon connector

• Pressure ranges: 0 to 15‘000 psi (0 … 1034 bar)
• Process connection: ¼ NPT female, including pressure snubbers
• Electrical connection Seacon, type 5507-2003-0004, 3 pins
• Temperature range -10 to 50°C compensated

ATM Subsea, right angled connection

• Pressure ranges 0 to 690 bar / 1034 bar / 1380 bar
• Process connection Flange with double o-ring seal
• Electrical connection 2 pin glass-to-metal seal
• Temperature range -10 to 40°C compensated

ATM with bulkhead fitting

• Pressure ranges 0 to 350 bar / 850 bar
• Process connection 5/16 – 24 UNF, including pressure snubber
• Electrical connection Binder connector 723, 5-pins
• Temperature range -25 to 150°C

Type Transducer

• Housing material Titanium
• Pressure range 0 … 450 bar, sealed gauge
• Overpressure 500 bar
• Process connection Ø 15 mm x 4.9 mm, flush diaphragm
• Electrical connection 5 gold plated pins
• Compensated temperature range 0 … 70°C
• Seal: Viton

ATM/GR

• Pressure range 0 … 50 mbar, gauge
• Pressure connection 1/4 NPT A
• Electrical connection Hytrel wires, green, marked
• Wires soldered to the glass-to-metal seal
• Differential press. conn. G 1/4 female
• Switch point 1 20.5 +/- 0.5 mbar
• Switch point 2 25.5 +/- 0.5 mbar
• Compensated temperature range: -25 … 85°C
• Oil filling AS 100 for medium temperatures of -55 … 150°C

ATM.Mini

• Pressure range 0 … 50 bar, absolute
• Process connection 7/16-20 UNF A, SW19
• Version Welded
• Electrical connection Connector Lumberg RSF 4, 4-pin
• Max medium temperature 100°C
• Compensated temperature range: -25 … 100°C
• Available pressure connections:
       M8 x 1 A, SW19
       3/8-24 UNJF-3A, SW19

TM

• Pressure range 0 … 400 bar, sealed gauge
• Overpressure 850 bar
• Process connection G 1/2 A
• Electrical connection Connector DIN 43650, metal thread
• Maximum process temperature 150°C

Field housing and DIN flange

Available for:
ATM, ATM/Ex, ATM.1ST, ATM.1ST/EX, PTM, PTM/Ex

• Compact and robust stainless steel version in 316 L
• Electrical connection, brass connection
• Spring terminals 1,5 mm² , PG 15
• Spring terminals and zero point potentiometer inside the field housing, so an easy installation is guaranteed.
• Measuring ranges according to DIN series between -1 bar to 25 bar, special calibrations possible
• High reliability, reverse polarity and short-circuit proof.

ATM.ECO with special connector

• Pressure range 0 … 210 bar sealed gauge
• Process connection G 1/4 A
• Electrical connection Hirschmann G4A1M
• Max medium temperature 125°C
• Compensated temperature range 0 … 70°C
• Viton seals

ATM

• Pressure range -1 … 32 bar, gauge
• Overpressure 3xFS
• Process connection G 1/2 male, manometer DIN 16288
• Electrical connection connector DIN 43650, metal thread
• Accuracy <=+/- 0.1% FS
• Compensated temperature range: -25 … 85°C Seal Viton

Transducer with print

• Pressure range 0… 5 bar
• Process connection: M8 x 1A, SW11 welded
• Seal : NBR

Typ ATM absolute

• Pressure range 0 … 350 mbar
• Process connection: Tub stub Ø 24/6.4 mm
• Electrical connection: RJ45
  Cable: connector side 1200 mm

Type ATM/X

• Sensor 1
• Pressure range 0 … 100 mbar, absolute
• Accuracy <± 0.25 % FS
• Sensor 2 : for brake fluid

TM, Passive Transmi5er with cooling element

• Process temperature: up to 250 C 0 …30 bar, gauge
• Process connec$on G 1/2 A,
• Manometer DIN 16288
• Electrical connec$on PTFE cable
• Compensated temperature range: -25 … 85°C
• Seal Viton

TM, Passive Transmitter, side vented

• Pressure range           0 … 10 bar, gauge
• Process connection    M14 x 1.5 A, HEX24 welded
• Electrical connection   MIL C26482, 10-6
• Medium temperature 150°C
• Temperature range -25 … 100°C compensated
• Electronic packed in gel